Blank Damascus Steel Billets Diy Knife Making Raw Material Handmade 16x3x0.3cm For Sale
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Blank Damascus Steel Billets Diy Knife Making Raw Material Handmade 16x3x0.3cm:
$29.99
FAST DELIVERY 30 DAYS RETURN100% CUSTOMER SATISFACTIONBlank Damascus Steel Billets Diy Knife Making Raw Material Handmade 16x3x0.3cm Product Name: DIY Damascus Steel BilletsMaterial: Damascus SteelDimensions:- Length: Approximately 16cm
- Width: Approximately 3cm
- Thickness: Approximately 0.3cmNote: Due to the forging and cutting process, there may be slight variations in size. The length and width may have an error of about 1-3mm, while the thickness may vary by 0.1-0.2mm.Hardness: Approximately HRC58 (achieved through vacuum deep cooling and heat treatment, balancing sharpness and toughness)Surface Finish: Smoothly milled/pickled, resulting in a finished product that is 1.5 times thicker than before flat grinding/pickling (with at least 0.5mm removed from both sides during flat grinding)Additional Details:
1. Flat grinding and simple acid cleaning have been performed, but further acid cleaning is recommended after molding/opening.
2. The pattern stickers on both sides may vary slightly in thickness due to segmental differences, and the textures on each side may differ.Pickling Process: For specific instructions, please consult customer service. The recommended water-to-acid mixing ratio is 1:4, although it can range from 1:3 to 1:5 depending on the material and pickling intensity. Seal the solution well when not in use to prevent dissolution.Usage:
1. Begin by polishing the rough steel or semi-finished knife product to 600# or higher, preferably achieving a semi-mirror finish.
2. Submerge the item in an acid pickling solution for approximately 1 minute to gauge the effect. For deeper etching, repeat the process with shorter durations.
3. Rinse the item with water and neutralize any remaining surface liquid with detergent.
4. Following the pickling process, perform any necessary polishing, buffing, and oiling for maintenance.REVIEWSThe product came very well packaged.
I\'m very happy. thank you for everything.
Seller strongly recommended.This is great! I definitely recommend! Product looks amazingDelivery was fast. Excellent seller, great communication. I advise everyone Related Items:
DAMASCUS STEEL BLANK BLADE' RAZOR SHARPE BLADE FOR SWORD MAKING, FULL TANG BLADE
$109.99
DAMASCUS STEEL VIKING SWORD FULL TANG BLANK BLADE FOR SWORD MAKING 32” INCH
$89.99
Custom Handmade Damascus Steel 28.00 inches Hunting Katana Sword Blank Blade
$99.99
