16x3x0.3cm Diy Damascus Steel Billet Bar Sandwich Blanks Knife Making Raw Materi for Sale

16x3x0.3cm Diy Damascus Steel Billet Bar Sandwich Blanks Knife Making Raw Materi For Sale

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

16x3x0.3cm Diy Damascus Steel Billet Bar Sandwich Blanks Knife Making Raw Materi:
$34.99

FAST DELIVERY 30 DAYS RETURN100% CUSTOMER SATISFACTION16x3x0.3cm Diy Damascus Steel Billet Bar Sandwich Blanks Knife Making Raw Materi Product Name: DIY Damascus Steel Knife BlanksMaterial: Damascus SteelDimensions:
- Length: Approximately 16cm
- Width: Approximately 3cm
- Thickness: Approximately 0.3cmNote:
- Due to forging and cutting processes, there may be slight variations in size:
- Length and width may have an error of about 1-3mm.
- Thickness may have an error of about 0.1-0.2mm.Hardness: Approximately HRC58
- Achieved through vacuum deep cooling and heat treatment, balancing sharpness and toughness.Surface Finish: Smoothly milled and pickled, resulting in a finished product 1.5 times thicker than without flat grinding/pickling (flat grinding removes at least 0.5mm from both sides).Additional Details:
1. Flat grinding and simple acid cleaning have been performed, but further acid cleaning is recommended after molding/opening.
2. Pattern stickers on both sides may vary slightly in thickness due to segment relationships, and textures on each side may differ.Pickling Process: Contact customer service for specific instructions.Water Mixing Ratio: Best ratio is 1:4 (can vary between 1:3 and 1:5 depending on material and acid pickling intensity). Seal well when not in use to prevent dissolution.Usage:
1. Begin by polishing the rough steel or semi-finished knife product to 600# or above, preferably achieving a semi-mirror state with no visible polishing scratches under light.
2. Submerge in acid pickling solution for approximately 1 minute to observe the effect. For deeper etching, repeat process with shorter durations.
3. Rinse with water and neutralize surface with detergent or detergent solution.
4. Finish with appropriate polishing, buffing, and oiling for maintenance as needed.REVIEWSThe product came very well packaged.
I\'m very happy. thank you for everything.
Seller strongly recommended.This is great! I definitely recommend! Product looks amazingDelivery was fast. Excellent seller, great communication. I advise everyone Related Items: